These Y splitters are designed to allow for additional water sensor use with the Leak Defender Control Box. The System includes one (1) water sensor on a 6′ lead but two can be used on the Control Box as is with the purchase of an additional water sensor. If a configuration of 3 sensors is desired, one (1) Y Splitter will be needed to make one of the sensor connectors on the Control Box split into 2 connectors for a total of 3 connections. If a 4 sensor configuration is desired, two (2) Y Splitters will be necessary to make the 2 available ports on the box into four. If 6 sensors are desired, you will need four (4) Y Splitters where the second two splitters will connect at one end of the first two splitters, leaving one open connecton on the first 2 splitters, and both connections at the end of the second two splitters . Extension Cables can be connected in between the sensors and the Control Box or between sensors and Y Splitters so you can cover a lot of ground with your 6 sensor application.
Part Number: FD-CS-ACC-005
Constructed of (2X) 4 cond. 22 awg wire cables
4 pin Molex connector system
Connectors compatible with all cable extension accessories
Can be used with multiple cables and sensors
For use with all systems