Place WaterCop flood sensors in areas that are susceptible to leaks such as water heaters, washing machines, ice makers/refrigerators, sinks and toilets. If you are installing these for insurance requirements and your insurance company accepts sensor-based system protection, you will need adequate sensor coverage quantity and placement so that all plumbing-connected and water-drawing appliances are monitored for leaks for it to qualify. You can place Single or Dual Probe configured WaterCop MultiSense Hub flood sensors in areas that are susceptible to leaks such as water heaters, washing machines, ice makers/refrigerators, sinks and toilets to name a few. Dual sensors are more convenient for sink cabinet / kick-space combo installations or for covering two locations less than 20′ apart from each other. If you need more coverage, the Rope Sensor Accessory can connect to provide leak sensing all along the rope instead of only at the probe heads. The MultiSense Hub also has an onboard ambient temperature sensor pre-configured to trip at 45°F to prevent catastrophic damage from leaks that result from freezing conditions and burst pipes. MultiSense Hubs can also be used with Pressure Sensor installed in your water lines. Product images show various configurations of the Hub and sensor accessories but this sku is only for the hub itself.
Features:
For use with Pro system only
2 AA batteries each (not included) or AC Adaptor (optional) powered
Transmits wireless shut-off signal to valve when moisture is detected or when ambient Low Temp hits 45°F
150′ – 200′ signal range depending on building layout, construction material
Up to 45 addressable wireless sensor hubs can be used with one Control Panel